NEW WEB SITE
Click Here For our Trading Hours and Contact Details
Please note, We attend Doll House and Model Railway Shows, on these times the shop will not be open.
Please contact us to confirm these dates.
|
|
Lighting / Electrical |
PRODUCTS |
|
|
|
|
| Select from below; |
|
FurnitureBar,Billiards
and Office |
Place Your Order Here Trains and Track Lemax Villages Christmas Every Day |
CR01 Brass and Crystal Chandelier $185.00
CR02 Brass and Crystal Chandelier $135.00
CR03 Brass and Crystal Sconce $39.95
BEMK234 Outdoor Street Lamp $28.00
Cir-kit
Just a small sample of the products to come, we are limited in space to show all our range.
Please ask, if you do not see the product you are seeking!
Basic Wiring Kit (CK105) $54.00
The CK105 kit contains all the parts necessary to tapewire a 5 to 6-room dollhouse.
You decide which transformer is most suitable for your wiring needs. Instructions and wiring diagram included.
Lowest price wiring kit on the market!
Transformers (CK1009A, CK1009B, CK1009C, CK1009D, CK1009F, and CK1009G)
Our plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room.
All Cir-Kit Concepts' transformers are designed to plug directly into a 240 volt wall outlet,
thus eliminating the need of building a special transformer enclosure within the dollhouse.
The four most popular versions contain a built-in thermal circuit breaker making them virtually burn-out proof.
In the event of an overload or short the thermal breaker simply opens and removes voltage until the unit cools.
After cooling, the breaker resets itself and automatically reapplies voltage to the output.
Tapewire (CK1017, CK1000, CK1001, and CK1002)
1001CK $22.00
Our double conductor tapewire is the "heart" of all Cir-Kit wiring systems.
From its introduction in 1976 to the present it has been the predominant method
of dollhouse wiring.
Its use creates a printed circuit type layout and completely eliminates the
congested wiring found in conventional systems. A super strong adhesive, exposed
by the removal of a peel away paper carrier, ensures a secure grip on any
surface. Since the copper foils are sandwiched between two layers of transparent
tape, the tape may be applied even over bare metal. The exposed transparent
tape has a matte finish allowing easy application and retention of paint.
Several major improvements have been incorporated into the design and manufacture
of the Cir-Kit Concepts' tapewire.
The most significant is color coding of
the copper foils.
This new feature greatly simplifies the making of corners
during the wiring process. Brass brads are installed only at the blue-to-blue
and copper-to-copper overlap points, eliminating any possibility of short
circuits at these locations. As great an idea as color coding may be, if the
colors are too intense they will bleed through light wallpaper or paint and
appear as unwanted ribbons of color. To ensure this doesn't happen, the one
colored foil is made of a light pastel blue for easy masking.
Another problem
that occurs with other, lesser quality brands of tapewire is "bubbling".
This
is a phenomenon that takes place once the tapewire is in place. As time passes,
the transparent overlay begins to buckle causing ripples that eventually show
through the wallpaper or paint coverings. Using a special manufacturing process,
Cir-Kit Concepts has completely eliminated this problem. A tape run made today
will appear as straight and true in a year as the day it was laid.
The Cir-Kit
Concepts' name is also embossed on the natural copper foil to identify it
as the one and only Cir-Kit Concepts' tapewire product. The main body of the
tape is 5/8" wide with a total thickness of approximately .005". The copper
foils will carry up to 5 amperes of continuous current.
Junction Splice (CK1007)
The CK1007 Junction Splice serves as the juncture point for connecting the lead-in wire to a tape run.
The imbedded nails, in addition to holding the connector in place, also establish electrical contact between the tapewire and the male pins on the lead-in wire plug. It is simply placed over the tape run and pounded in. Two sets of protruding teeth on the bottom also provide additional paths for current flow into the copper foils. The threaded screw aids in locking the junction splice in place and prevents accidental dislodgement during use. Mates with all CK1008 series of lead in wires.
Transformer Lead-in Wires (CK1008, CK1008-1, CK1008-2, and CK1008-3)
CK1008 Transformer Lead-in Wire. The CK1008 lead-in wire provides a transformer to dollhouse electrical interconnection and may be used with any screw-terminal type transformer. One end of the wire is equipped with a plug for connection to the CK1007 Junction Splice on the dollhouse and the other with spade lugs for connection to the transformer output terminals. Overall length, approximately 6 feet.
CK1008-1 Transformer Lead-in Wire with Switch. This lead-in wire may be used for those installations requiring the convenience of total dollhouse on/off power control. (Eliminates need for unplugging lead-in wire from dollhouse to disconnect power.) Same in all other respects as CK1008.
CK1008-2 Transformer Lead-in Wire with Switch and Fuse holder. Same as CK1008-1 but with added in-line fuse holder. Can be used for protection of any transformer with screw terminals. The fuse holder is a threaded assembly and accepts all Cir-Kit fuses.
CK1008-3 Transformer Lead-in Wire with Switch and Spade Lugs. Use this lead-in wire in any application requiring spade lugs at both ends, i.e., transformers to terminal blocks. Contains an in-line switch and is identical in all other respects to CK1008-1.
Don't forget our big range of miniature accessories!
These are AUSTRALIAN DOLLAR PRICES
How to find us
Place Your Order Here
Back to Trains and Track
Lemax Villages
Christmas Every Day
